Hello,
I was successful in flashing stm32f103. The SWD connection for programming is on the board. See picture. But I probably can't get the display (12864 lcd st7567a) to work. I've already tried several "Hello World" test sketches but unfortunately without success. I know the pin assignment from the IC to the display, there are 13 pins from PB12 to PA12 but unfortunately I can't get a picture on the thing. The plan is that you might use it as a status display or even use the 4x4 keypad for settings.
Hallo,
ich war erfolgreich in sachen stm32f103 Flashen der SWD anschluss zum Programieren ist auf dem Board ausgeführt Siehe Bild. Aber ich bekomme das Display vermutlich ein (12864 lcd st7567a) nicht zum laufen. ich habe schon mehrere "Hello World" Test Sketch versucht aber leider ohne Erfolg. ich weiß die Pinbelegung vom Ic zum Display, es sind 13 Pins von PB12 bis PA12 aber ich bekomme leider kein Bild auf dem Ding. Der plan ist das mann es evtl. nutzt als Statusdisplay oder sogar das 4x4 Tastenfeld zum Einstellen zu benutzen.