Drive to the garage...

[SefanH]

How did you route the perimeter wire to the garage? I have now chosen a distance of approx. 5cm to the 2nd wire, so that the mower drives properly into the garage. If I put the wires closer together, the mower won't go into it. He turns and drives round and round.
I think that the distance between the wires is too big?!? Isn't it?

 

[Bernard]

I have now chosen a distance of approx. 5cm to the 2nd wire,

??
Only one wire need to reach the garage and the second one is at back or at least at 90 Degres if garage is locate into angle.

 

[SefanH]

The wire is around the garage, so the mower don't bounce at the garage. ;-)

 

[Bernard]

The wire is around the garage

?? what do you mean by around

 

[SefanH]

I see... That's my fault...
Like in the picture below. That's the right way... I have made it wrong.